Large Smoke Emitter Instructions

How to Use Your Large Smoke Emitter

Important: Read these instructions completely before use. This product is designed for outdoor use only and must be operated by a responsible adult.

Before You Begin

• Choose a clear outdoor area away from people, animals and anything flammable.
• Allow at least 1.5 metres of clear space around the emitter.
• Avoid using it in strong wind or poorly ventilated areas.
• Tell everyone nearby before activating the emitter.
• Keep water or a wet cloth nearby as a precaution.

Activation Instructions

1. Position the emitter upright.
   Hold it firmly from the bottom with the smoke outlet pointing upward and away from your face and body. Never aim it toward another person.
2. Pull the activation ring.
   While keeping the emitter upright, pull the ring directly upward using one quick, firm movement.
3. Hold from the base or place it down.
   The upper section becomes hot during operation. Continue holding only the bottom, or carefully place the emitter upright on stable, clear ground. Protective gloves may be used.

Always keep the smoke outlet facing upward and away from you, including while pulling the activation ring.

Safety Warnings

• Do not use indoors.
• Do not allow children to operate the emitter.
• Do not point it toward yourself, another person or an animal.
• Keep the smoke away from eyes and faces, as it may cause irritation.
• Do not touch the top, fuse or inside of the emitter.
• Do not dismantle, modify or interfere with the casing or activation mechanism.
• Do not tilt the emitter while pulling the activation ring.
• Do not attempt to relight or reuse it.

After Use

• Allow the emitter to finish completely.
• Do not touch or dispose of it until it has fully cooled.
• Dispose of the cooled product responsibly and in accordance with local requirements.

Use responsibly. Gender Reveals Australia is not responsible for injury, property damage or loss caused by incorrect use, unsafe handling or failure to follow these instructions.